How Much Does An Extended Service Warranty At Harbor Freight Cost For An Air Compressor

In ship, the chief engineer is always in charge of the air status and fridge plants. But in some cases whereby chief engineer is busy with other things, 2nd Engineer tin can manage whatever problem that may come up with these plants.

On this article, nosotros are going to explain petty bones things you lot need to know nearly starting and stopping these plants.

Lets say your ship have two air compressors and number one is running, but u similar to modify to number two plant in other to stop the running one, here are steps yous need to take, for the safety of the compressor.

i. Shut The liquid line Five/Five – while the #1 pinch is running, close the liquid line valve to pump downwardly the gas to the condenser. During this process, the #one compressor will shutdown automatically due to depression pressure.

2. Close the #1 suction and belch valve fully – this process volition insulate this compressor from been pressurized when #2 starts.

3. Open up #2 compressor Discharge valve fully, open the liquid line halfway 🌓, then open same #2 suction valve nigh one/3 ( three or 4 turns, then wait for 1 or 2 mins and start the compressor.

Note: once the compressor starts, open the suction valve slowly till fully open, the too go to liquid line valve and open up slowly till fully open. Cheque your pressures while opening the suction valve and after all valves are fully open up equally explained above.

You lot tin drop your questions on the comment box below.